Where to ventilate a diaphragm roof

We don’t always think about it, but most timber flat roof structures have a diaphragm (typically a plywood or OSB board) to tie the structural components together. Sometimes a pitched roof structure will also require a diaphragm to help provide an interdependence of the structural timbers. The problem is that sometimes these diaphragms can also become the condensation or ‘dew’ point as moisture vapour moves through the construction.

Often pitched warm roof constructions are used to create habitable spaces in the once ‘cold’ roof construction such as a rooftop development or penthouse flat. In some cases, living quarters, kitchens, shower rooms as well as sleeping accommodation are all included in these areas. This can lead to very high moisture vapour pressure especially in the winter months when natural ventilation is kept to a minimum.

In these rooftop constructions it can also be hard to get a complete vapour control layer (VCL) due to the different roof pitches and the fact that we normally fix the internal finishes through the VCL.

Any moisture vapour that penetrates the internal finishes and VCL, along with any moisture from the construction phase is at risk of condensing within the cooler, outer layers of the roof construction. This is quite likely to be interstitial condensation on the underside of the diaphragm and could result in a slowly degenerating structure.

This points up the need to provide ventilation to the underside of the diaphragm in line with BS5250 to ensure any moisture can be ventilated away before it starts to cause trouble. A minimum 25mm ventilation void should be provided between the top of the insulation and the underside of the diaphragm.

Creating the ventilation void is one thing. Detailing the ventilation at the junctions of the roof is another!

AIRTRAK Roof Void Ventilation products can help with these details.

roof void ventilation system

AIRTRAK® is a proprietary range of ventilators designed specifically for the ventilation of roof voids. AIRTRAK® assists specifiers, builders and specialist contractors in helping them to meet the requirements of the Building Regulations in relation to the important issue of roof void ventilation and the control of condensation.

A full list of all downloads for all product ranges. If you don't have an account, then please register here - it only takes a few seconds.

Our interactive learning sessions are delivered by a technical expert, giving you the opportunity to get your questions answered.

All product lines can be purchased directly from Nicholson. Please call +44 (0) 1763 295 828, or contact us for a quotation

A trusted supplier of roofing products and systems

New build care facility

New build care facility

with Bowmer & Kirkland

Barking Station

Barking Station

with Photon Energy

Liberty School, Romford

Liberty School, Romford

with Willmott Dixon

Private dwelling, London

Private dwelling, London

with Pascal Huser D&B Ltd